DISSCO 551
NONFIBERED ROOF COATING
PRODUCT DESCRIPTION
DISSCO 551 is a ready to use, non-fibered asphalt base coating of heavy
paint consistency, manufactured with high grade industrial type blown
asphalts and industrial grade solvents compounded with special slow drying,
penetrating weatherproofing oils.
DISSCO 551 is specially formulated for priming all dried out asphalt
based composition roof surfaces to resaturate and revitalize the old felt
to a full-bodied, uniform, weatherproof base for proper application of
DISSCO 550 Fibered Roof Coating.
DISSCO 551 is also excellent preventative maintenance coating to prevent
the sun and other weathering elements from deteriorating the composition
roofing. Also widely used as an economical protective coating for masonry
and metal surfaces, such as metal roofs, gutters, spouts, tanks, structural
iron, underground pipes, etc. which need protection against water and
rust damage. DISSCO 551 is inert to mild acids and alkali, chemically
inert, non-poisonous and non-toxic when used as directed.
APPLICATION
DISSCO 551 is ready to use directly from the container. No thinning or
heating required. DISSCO 551 can be applied by roller, brush, or sprayed
with adequate airless equipment. The surface to be coated must be clean
and dry, free of any material which prevents proper adhesion to the surface.
RECOMMENDED COVERAGE
It is recommended that the DISSCO 551 be applied at a rate of 1 to 2
gallons per 100 square feet of area. Application rates may vary with the
condition of the surface to be coated.
DISSCO 550 PHYSICAL PROPERTIES
| Color |
Black |
| Weight per gallon |
7.6 lbs. |
| Vehicle solids |
50 - 60 % |
| Volatile vehicle |
40 - 50 % |
| Additives |
1 - 4 % |
| Flash point |
105° F |
| Base asphalt meets specification |
ASTM D-449 Type II |
| DISSCO 551 meets or exceeds specifications |
ASTM D-41 |
| |
Federal Specification SS-A-701 |
AVAILABILITY
DISSCO 551 is available in three standard viscosities (custom grades
are available by special order), and is available bulk and in packaged
sizes of 5-gallon pails or 55-gallon drums.
WILL NOT FREEZE, may be stored outdoors.
When temperature is below 60°F - store product indoors overnight prior
to use.
Clean equipment with mineral spirits.
CAUTION
Contains mineral spirits. Do not use near fire or flame. Use with
adequate ventilation. Vapor harmful. Avoid prolonged or repeated contact
with skin or breathing of vapor. Close container tightly after each use.
Harmful or fatal if swallowed. If swallowed, DO NOT INDUCE VOMITING. Call
physician immediately. KEEP OUT OF REACH OF CHILDREN.
WARRANTY
DISSCO warrants its products to be free of defects in materials, but
makes no warranty as to appearance or color. Since methods of application
and on site conditions are beyond our control and can affect performance,
DISSCO makes no other warranty, expressed or implied, including warranties
of MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE, with respect
to DISSCO coatings. DISSCO's sole obligation shall be, at its option,
to replace, or to refund the purchase price of, the quantity of DISSCO
coating proved to be defective and DISSCO shall not be liable for any
loss or damage, including incidental or consequential damages, arising
from the use of DISSCO coatings.
In case of an EMERGENCY involving any DISSCO product please call:
Info-Trac @ 1-800-535-5053.
For further information, please contact:

Denver Industrial Sales &
Service Company
|
850 South Lipan Street
|
|
Denver, CO 80223
|
|
Ph. (303) 935-2485 · Fax (303) 935-6787
|
|
Toll Free (877) 935-2485
|
|